USB 2.0 to Gigabit Ethernet Adapter
- Supports10/100/1000Mbps Ethernet MAC with Full-Duplex Support.
- Supports 10/100/1000Mbps Ethernet PHY with HP Auto-MDIX.
- Supports USB specification 1.0/1.1 and 2.0.
- SupportsIEEE802.3/802.3u/802.3ab.
- Supports checksum offloads(Ipv4, Ipv6, TCP, UDP).
- Connect Computer to USB 2.0, Supports OS: Windows, Linux, Mac, DOS ODI Driver.
The USB 2.0 to Gigabit Ethernet Adapter is a high performance and low cost solution.
It enables Gigabit Ethernet network connection capability for desktops, ultrabook with standard USB port.
It resolves the trouble of the computer without Ethernet port that you can also connect computer to Ethernet through USB 2.0 port easily.
Related products
MTN520-1SFP+ 10Gigabit PCI-E x8 Single SFP+ Fiber NIC Server Adapter (Intel 82599ES Based)
MTN82599-1SFP+ is a PCIe x8 2.0 10Gbps Single Port Ethernet Fiber Server Adapter based on Intel 82599 Chipset. The design of this server adapter card is mainly for servers and high-end devices.
Networking Solutions
USB 3.0 to Gigabit Ethernet Adapter
Single chip USB 3.0 to 10/100/1000M Gigabit Ethernet controller with Energy Efficient Ethernet (EEE).
Feathers as below:
- Integrates on-chip USB 3.0 PHY and controller compliant to USB Spec 3.0, 2.0 and 1.1
- Supports all USB 3.0 power saving modes (U0, U1, U2, and U3)
- Supports USB Super/High/Full Speed modes with Bus-power or Self-power device auto-detect capability
- Supports IEEE 802.3az (Energy Efficient Ethernet)
- Supports parallel detection and automatic polarity correction
- Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading
- Supports TCP Large Send Offload V1
- Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
- Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding
- Supports Jumbo frame
- PHY loop-back diagnostic capability
- Support Wake-on-LAN Function
- Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin
- Support windows 8, windows 7, windows vista, Apple 10.6 and Apple 10.8
MTN540-1RJ PCI Express x8 Single Copper Port 10 Gigabit Server Adapter (Intel X540 Based)
MTN540-1RJ is a PCIe x8 10Gbps Single Copper Port Ethernet copper Server Adapter based on Intel X540 chipset, and is compatible with PCIe x16 slot.
This server adapter optimizes its performance, making the system I/O no longer be the bottleneck of the network application and it can be used in any PCI Express X8 host device and its master control (Intel X540 10G Ethernet controller) includes two fully integrated Ethernet Media Access Control (MAC) and two fully integrated 10GBASE-T copper PHYs ports.
The Server Adapter MTN540-1RJ Simplifies Migration to 10 Gigabit Ethernet(GbE), Provides iSCSI FCoE Virtualization and Flexible Port Partitioning (FPP).
Networking Solutions
USB 2.0 to Ethernet Adapter（UVC）
- No driver software is required, plug and play.
- Supports10/100 Mbps auto-sensing.
- SupportsUSB specification 1.0, 1.1 and 2.0.
- Supports802.3 10BASE-T/100BASE-TX.
- Supports twisted pair crossover detection and connect Computer to USB, auto-correction(HP Auto-MDIX)
- Supports Operating system for computers:
- Windows: Windows 7 / Windows 8/ Windows Vista/ Windows XP (32/64bit)
- Mac: Mac OS X 10.5 to 10.8